Defects Are Hints For Something Better

In all the creative work I have done with live-edge material, I have always looked at a cut section – where a limb was removed or the material cut to length – as a shortcoming.

But recently, I had an epiphany.

Like so many of my revelations, this one came while experimenting on a piece of scrap wood worth nothing to me. This particular piece of wood was about the size of a 2×4 roughly three feet long. The middle foot had the bark intact and the area to either side was cut straight.

I was carving for no reason other than to carve for enjoyment. I started removing material, trying to make the cut edge flow into the live edge. Then, as I like to do, I began forming a twist. Completely by eye, I carved a quarter twist into the first third of the board, blending it into the bark as best I could.

The result was very interesting. It was no longer an area of defect that you should divert your eyes from and politely pretend you hadn’t noticed. It was not apologetic, rather it was a bold feature that demanded equal, if not greater attention than the live edge. I think that the irregularity of the done-by-eye twist worked favourably with the organic bark edge.

Moreover, I feel that if used between two sections of live edge, this twist would not only fit in with equal authority, but it would in fact visually tie the two live edge sections together.

I am never satisfied when I have to make a compromise in a design to make up for a shortcoming. This, however, is not a compromise – it is taking a problem and fully exploiting it for what it really is: a design opportunity.

Live Edge twist

I would be delighted if you left a comment!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s