This is the Veritas Scraping Plane Insert, installed in my favourite bench plane. I bought it years ago to use in my #4 bench plane and used it a few times, but over time I found it simpler and easier to use a cabinet scraper or card scraper. I haven’t used the insert in years.
The assembly installs without tools in a bench (bevel-down) plane with a blade at least 2″ wide. I think that a #4 is the perfect size for it.
I am including a 0.016″-thick, 2″-wide blade (shown installed) as well as two 2-3/8″-wide blades with thicknesses of 0.016″ and 0.024″. The blades can be used on their own as card scrapers, as well as in the insert. I still have the instruction sheet but the 3/32″ hex key to adjust the set screws in the sides of the insert (seen in the top photo) has gone missing.
Okay, here’s the deal.
If you would like this Veritas Scraping Plane Insert (just the insert – not the plane, too!) please leave a comment below indicating your interest by 6pm Sunday May 5.
I will then draw a winner at random. Even if you don’t get this item, remember that there is still much more I want to give away.
And if you haven’t already, be sure to subscribe to my blog so you can be notified as soon as I post something new! Please tell your friends about my Overflow program.
Review the details of the Overflow program.
Discover more from Sculptural Woodwork by Chris Wong
Subscribe to get the latest posts sent to your email.
HI Chris
I have a spare #4 that the scraper would fit right into.
Roy
Hi Chris, i am interested!
Congratulations Brian – you’re the winner of the Scraping Plane Insert. E-mail me your shipping address and we’ll work out the details.
Chris
Very cool insert – and the overflow program is a great idea.