On June 30th, with other projects in the shop wrapping up, I realized that I had three weeks until Port Moody Celebration of Wood Woodfair. I knew that I wanted to have some new work for the show and got the idea to design a chair. That night I started prototyping. Previously, I posted a review of prototype #1, #2 and #3.
During the build, I referred to the chair as version 4, not prototype 4 because I hoped that I would be satisfied with the end result. As it neared completion, I realized that although it was clearly my favourite of the four designs, it still needed refining.
This design benefited greatly from the previous three prototypes on which I worked out the critical dimension and angle of the back rest. Here is what this design taught me:
- I got the dimensions and angle right so the chair was comfortable;
- the aesthetic of the design was okay, but I wasn’t quite happy with the overall form; and
- the whole chair tended to sway side-to-side. The sway seemed to come from the frame itself and not from the joint at the bottom stabilizing cross member. This may have been a problem with the design itself or with the fact that ash was one of the more flexible woods.
In three weeks I designed and built four prototype chairs and learned a lot along the way. However, I wasn’t able to finish the design process but I discovered what worked and what didn’t work, what I liked and what I didn’t like. It was a good challenge and I enjoyed the journey.
In a way, it was my own version of the Telephone Game Design Experiment (why not sign up to play?).
This slideshow includes all the pictures I took during the build. I welcome any feedback you may have. You can follow my live updates via Twitter, facebook, or Tumblr.
Discover more from Sculptural Woodwork by Chris Wong
Subscribe to get the latest posts sent to your email.
I like the lighter look. The lines and curves are more “sensuous” in #4. I hope someone orders 12 for a conference table in some giant corporation. Nice job!
#4 looks great! though I’m sorry it flexes to much for comfort. I can see how if you constantly evolved the same pieces, you could really get the kinks out (like say Maloof’s 164th chair) I should really attempt something like this in the future. Thanks for sharing your design process out in the open.
I think you’re on to something here Chris. The base, the seat and the back all flow together. I was thinking that maybe a slight taper or perhaps a oval form to the seat and back rest might improve the look. Make it look less like a picket fence?
I am 6’3″ tall and weigh 225#, would your chair support me?
I am confident that there is enough strength in the chair to hold you off the ground. However, the side-to-sway issue might be an issue. I’m not sure how it would fail, but I think it would be interesting to learn.
Chris
That’s 2 clever by half and 2×2 clever 4 me. Thknas!