Products From The Mind of Chris Wong
Looking for extraordinary? Do it with Flair Woodworks & Design.
So, with the top done, my next step was to design a suitable base for it. I went to my computer and started playing with designs. I had an idea for a base that consisted of a pair of rectangular frames and cross members. However, none of the variations that looked good to me. Slim, tapered … Continue reading 21st Century Writing Desk – Designing the Base
Last week, I saw a picture of a roof top that resembled a wave. The roof prompted me to ponder the question: does a tabletop really need to be flat? Running with that notion, I carved this maple sample, dyed it black and waxed it to increase the sheen. I was really pleased with the sample, … Continue reading 21st Century Writing Desk – Making the Top
Earlier this week, I began work on a new cribbage board. The section of Pacific yew didn't look like much at first. I wanted to include this protrusion. And wanted to exclude this chainsaw cut. I screwed a straight piece of wood on to one end of the material and used a scrap of wood … Continue reading End Grain Yew Cribbage Boards, Part 1
A couple of years ago while working on a chair, I found myself needing to lay out the position of the seat slats on the centre rail, which was basically a cross-lap joint. Normally, I'd use my marking knife for this operation, but due to the thickness of the components, my marking knife wasn't able … Continue reading Making a Long-Blade Marking Knife
In my last Craftsy blog post, I covered techniques to cut perfect mitres. If you've ever made a mitred joint before, you probably discovered that cutting them accurately can be finicky, but assembling them was downright agonizing. However, with a couple of tricks and the right clamping tools on hand, and some practice, assembling mitres … Continue reading How to Perfectly Assemble Mitre Joints
Early on, I regarded mitre joints as difficult and finicky, so I often used other joinery that I could execute more easily (even dovetails) instead. But once I figured out a good process for making mitre joints, I found them to be no more difficult than other joinery, and certainly quicker than dovetails! My latest article … Continue reading Cut Perfect Mitre Joints
Today, I'm doing whatever I please so I set up my horses under the trees. My workpiece is happy, content in the shade - these perfect conditions I wouldn't dare trade. Finish goes on easily. I'm in no rush; I make slow, deliberate strokes with my brush. The urethane flows nicely and quickly dries before … Continue reading A Relaxing Day Off on Canada Day
Until the end of the month, I am offering all cribbage boards (including the first cribbage table I built) at 10% off the list price. Click on any image below for details and availability.
Ever since the Shop Stool Build-Off, woodworkers everywhere have been looking for more opportunities to participate in online group builds. Canadian Woodworking recently announced their second build-off called, Building Together - Shop Tools. I've made a number of tools for my own shop, and this scrub plane could well be the most-used. The event runs for the … Continue reading Build-Off: Canadian Woodworking’s Hand Tool Building Event
In 2007, I was into turning in a big way. I got into turning pens using exotic woods carefully paired with a package of pen hardware. My preference was chrome-plated hardware for its durability and affordable price. The result, when paired with African Blackwood, was an undeniably classy pen. One special piece of wood was … Continue reading Roots of Flair: Pushing the Limits
