One night last week, fellow planemaker Scott Meek and I were discussing scrub planes. Neither of us had ever built one and so we began a Scrub Plane Build-Off right then and there. Scott's plane was resawn, then laminated back together, the same way he makes the rest of his hand planes. Here are the specs for his plane: Body: … Continue reading The Scrub Plane Build-Off
I was asked to make a wooden body for a Veritas Inset Plane for demonstration purposes at Lee Valley's Coquitlam showroom. Along with a basic instruction sheet, this is what was in the box. Completing the plane was a neat project that only required a few hours, so I took the opportunity to do a … Continue reading Veritas Inset Plane
In Session 1, Session 2, Session 3 and Session 4 I began working on an exploded shelf I'm calling Deconstructed. I finished the last session by filling in air bubbles with epoxy. Today, in the final session of this Tweet-Along, I completed the shelf, including applying the first coat of finish. As always, I documented my progress live on Twitter … Continue reading Deconstructed, Session 5
In Session 1, Session 2, and Session 3 I began working on an exploded shelf I'm calling Deconstructed. I finished the last session by pouring clear resin around the wood parts set in a mould made of waxed melamine. Tuesday, I unmoulded the casting. If everything had gone perfectly, all that would have been required would have … Continue reading Deconstructed, Session 4
Earlier this month in Session 1 and Session 2, I began working on a new project. I had cut parts for the mould and begun waxing them. Yesterday, I finished waxing the mould and poured the resin. As always, I documented my progress live on Twitter using hashtag #FlairWW (follow me @FlairWoodworks) which was useful because each update had … Continue reading Deconstructed, Session 3
Last week, in Session 1, I began working on a new project. I finished the day with three parts for a shelf and the task of researching casting resins. Yesterday, I bought Smooth-On's Crystal Clear resin and proceeded with the build. As always, I documented my progress live on Twitter using hashtag #FlairWW (follow me @FlairWoodworks) which was useful … Continue reading Deconstructed, Session 2
Yesterday, I went down to the shop with the intention of completing a piece of furniture. I had no idea what I was going to build, but knew it was likely to be sculpted. As always, I documented my progress live on Twitter using hashtag #FlairWW (follow me @FlairWoodworks) which was useful because each update had a … Continue reading Deconstructed, Session 1
After Woodworking in America in Pasadena, Paul-Marcel and I stayed in California for a few days to explore the local attractions, including The J. Paul Getty Museum, Los Angeles County Museum of Art, Eagle Tools, and Paul Schurch's woodworking shop. Paul-Marcel's latest post includes video footage (duration - 15:11) from inside the Los Angeles County Museum of … Continue reading Woodworkers in an Art Museum
In Part I and Part II, I built this prototype table which was to be mounted on a wall. The next step in the design and construction of the table was to install hardware that would allow it to be mounted to a wall. The simplest way to attach the table would have been a pair of big … Continue reading Black Locust Wall Table, Part III: Testing Blind Mounting Hardware
After Woodworking in America, I hitched a ride to Phoenix with Paul-Marcel. In his shop, I built a puzzle box with a mechanical lock. In this video, I demonstrate the operation of the box while talking about wooden jigsaw puzzles and the design and construction of the box. (Duration - 10:04) Read about another of … Continue reading Mechanical Puzzle Box
