Last night on #Woodchat, we had a look at Insanity 2 and discussed options for the back of the cabinet and shelves. The discussion started at 13:21 and ran until 46:20. I learned that my cohost, Matt Gradwohl, was equally insane. Together, we decided that our viewers may have also been insane for following along (unless they happened … Continue reading #Woodchat is Going Insane
Insanity 2: The Top
Last week, I put three sheets of 1/8" Baltic birch plywood between two forms I made to create the top of the cabinet for the doors. Although the glue-up seemed to go smoothly, I couldn't be sure of the success until I removed it from the form. I let the bent lamination set for two … Continue reading Insanity 2: The Top
Elm Table Top
A couple of months ago, a local couple approached me looking for a characterful table top for a metal base they were having made. I invited them to visit my shop and they picked out this slab of elm. I flattened the top side of the slab and filled the voids with resin. I inlaid … Continue reading Elm Table Top
Insanity 2: Doors
As you saw in my last post, I had created two doors with curved frames for Insanity 2. The curved edges eliminated most of the conventional options of attaching doors to a cabinet, so I sat down with my sketch book to come up with other ways. Here are the sketches that I drew. Their … Continue reading Insanity 2: Doors
Insanity 2
Insanity 2 is the working name for my latest speculative project. As with most, I'm designing it as I go and using the materials as my primary inspiration. Every project starts with an inspiration This piece of ash was the inspiration. It's been sitting in my shop for years waiting for me to do something … Continue reading Insanity 2
A Trip Through a Log
Yesterday, my friend and lumber supplier, Dave Kilpatrick, brought over a piece of yew which he wanted made into trivets. I built a sled and crosscut a series of 1-1/4"-thick slices on my bandsaw. I took a series of photos as each slice was removed, which allowed you to see how the section of log … Continue reading A Trip Through a Log
Live-Edge Birch Smoothing Plane
When I was breaking down yellow birch for the last production of moulding planes for Time Warp Tool Works, I ended up with one block about 3 inches square and 10 inches long, with a partial live edge along one surface. It was too small to use as a moulding plane and it seemed to … Continue reading Live-Edge Birch Smoothing Plane
Three-Week Chair, Prototype #4
On June 30th, with other projects in the shop wrapping up, I realized that I had three weeks until Port Moody Celebration of Wood Woodfair. I knew that I wanted to have some new work for the show and got the idea to design a chair. That night I started prototyping. Previously, I posted a review … Continue reading Three-Week Chair, Prototype #4
Three-Week Chair, Prototype #3
On June 30th, with other projects in the shop wrapping up, I realized that I had three weeks until Port Moody Celebration of Wood Woodfair. I knew that I wanted to have some new work for the show and got the idea to design a chair. That night I started prototyping. Previously, I posted a review … Continue reading Three-Week Chair, Prototype #3
Three-Week Chair, Prototype #2
On June 30th, with other projects in the shop wrapping up, I realized that I had three weeks until Port Moody Celebration of Wood Woodfair. I knew that I wanted to have some new work for the show and got the idea to design a chair. That night I started prototyping. I posted a review of … Continue reading Three-Week Chair, Prototype #2
